Useful Layers / Field guide

Budget PLA: compare the cost of one usable spool

Four dated US black 1.75 mm, 1 kg PLA spool offers, with shipping tradeoffs and exact selections. Choose a first order without mistaking bulk or refill prices for a single roll.

  • Updated:
  • Author: Useful Layers
Painted complete filament spool beside a delivery carton and blank order notebook
AI-generated editorial illustration. A generic order-checking scene; not a named seller, measured filament quantity, verified package or delivered-price quote.

Is this the right guide?

Read this if you need one black 1.75 mm, 1 kg spool of PLA and want to compare the order cost.

Not quite? Not sure PLA suits the project? Start with First filament: PLA or PETG?

If you need one roll, compare one complete spool plus shipping and tax. A lower price for a refill, a dozen rolls or another shipping region can answer a different buying question.

First decide whether PLA suits your project. Then narrow the package to your printer’s diameter and feed system. This comparison helps with the order cost once that material decision is made.

Method: Official US storefronts and product data checked October 1, 2026, at 17:59–18:02 UTC (10:59–11:02am PDT). These are four black, 1.75 mm, 1 kg filament spools, each priced as a single-spool selection. Coordinator price/policy recheck: 18:09 UTC (11:09am PDT). Stock is a dated storefront indication. We have not printed with these products or compared their quality. The manufacturer links in the dated price table are ordinary, nonaffiliate links. Separately labeled Amazon options below may earn a commission.

Four equivalent package selections

Prices are USD before shipping and tax, without coupons, memberships or bulk discounts. “High Speed” is Overture’s product name, not a speed result from our testing.

Exact single-spool selection Observed item price What to check next
SUNLU PLA Black, Ship to USA, 1.75 mm, 1 kg $10.29 Confirm US warehouse and shipping charge; store messages differ.
Overture High Speed PLA Black, 1.75 mm, 1 kg $13.99 Written US policy adds $5.99 below $29.99; address restrictions apply.
Polymaker Panchroma Basic PLA Black, Spool, 1.75 mm, 1 kg $18.99 Written US policy adds $5.99 below $35. Select Spool, not Refill.
MatterHackers Black MH Build PLA, 1.75 mm, 1 kg $19.99 Quantity-one price; get a shipping quote before comparing totals.

The selected storefront listings showed stock available when checked. That does not establish delivery to your address or continued availability.

Amazon buying options

Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. These links may earn a commission at no extra cost to you. See our affiliate disclosure.

These Amazon US selections were checked for the named product line, Black color, 1.75 mm diameter and a single 1 kg spool. We did not establish that their manufacturer part numbers equal the storefront SKUs above. Confirm the selected package before ordering. Amazon prices are not quoted here: the dated prices and shipping calculations above belong to the separate manufacturer offers.

SUNLU standard PLA Black

Amazon US marketplace option: Black / 1.75 mm / single 1 kg spool. Check the current seller, selected package, price and shipping on Amazon; we have not verified today’s seller. This affiliate link may earn a commission. The manufacturer price table above does not quote this Amazon offer.

Check SUNLU standard PLA Black, 1.75 mm, 1 kg spool on Amazon.

OVERTURE High Speed PLA Black

Amazon US marketplace option: Black / 1.75 mm / single 1 kg spool. Check the current seller, selected package, price and shipping on Amazon; we have not verified today’s seller. This affiliate link may earn a commission. The manufacturer price table above does not quote this Amazon offer.

Check OVERTURE High Speed PLA Black, 1.75 mm, 1 kg spool on Amazon.

Panchroma Basic PLA Black

Amazon US marketplace option: Black / 1.75 mm / single 1 kg spool. Check the current seller, selected package, price and shipping on Amazon; we have not verified today’s seller. This affiliate link may earn a commission. The manufacturer price table above does not quote this Amazon offer.

Check Panchroma Basic PLA Black, 1.75 mm, 1 kg spool on Amazon.

What does one spooled kilogram cost including shipping?

There is no verified cheapest delivered option for every US address in this comparison. Two dated policy calculations are possible; SUNLU and MatterHackers need checkout shipping quotes. Recheck current item prices before using either example.

Polymaker’s written policy makes a single $18.99 roll $24.98 before tax, using its $5.99 under-threshold fee. That is policy-based arithmetic, not a checked cart.

Overture’s US policy makes its $13.99 roll $19.98 before tax under the same calculation. It serves the contiguous 48 states and Washington, D.C.; Alaska, Hawaii and US territories are excluded. Its product structured data also lists zero shipping, so confirm the final charge rather than treating that metadata as a quote.

SUNLU has the lowest item price in these four selections, but its shipping information does not settle a one-roll total. The product page and shipping policy advertise free shipping to eligible US regions; the store banner says free shipping over $40. The policy excludes non-mainland or remote areas and military addresses. Check the US selection and final charge. We leave its delivered total open.

MatterHackers advertises conditional US free shipping above $35 on its product page. We did not establish the below-threshold fee. Its $14.99 per roll requires 12 or more rolls; a first order of one is $19.99 before delivery and tax.

Buy the quantity you will use

An extra roll can meet a shipping threshold while increasing your cash spend. Decide whether you actually need it before adding colors to save a delivery fee. Compare the whole order, not only the per-kilogram number.

Keep the package selection intact when reopening a link: black color, 1.75 mm diameter, 1 kg net filament and a spool. Different colors, refills, blends and multipacks need their own checks. Our spool-or-refill guide explains why a refill price cannot stand in for a usable first spool.

Check the exact reel against your feed hardware separately. A storefront’s broad compatibility statement does not prove physical fit in every automatic color unit. Follow your printer and filament instructions rather than selecting a roll by an untested speed or strength claim.

One-spool worksheet

Use the current checkout quote for one complete spool, then its shipping and tax. For a second candidate, replace all three amounts; do not carry over another seller’s delivery charge. Unknown charges leave an incomplete total.

Enter a current quote for one complete 1 kg spool in USD. Blank tax or shipping means excluded, not free. Enter 0 only for a confirmed zero charge.

With JavaScript off, calculate: spool price + shipping + tax. The dated worked examples above remain readable. This worksheet includes no printer.

Your worksheet entries stay in this page. They are not sent or saved. Reloading clears them.

Make the next order concrete

Shortlist two usable selections, reopen their current US prices and compare the total to your address. Use the one-spool worksheet above for a filament-only order. If you also need a printer, use the full starter-budget planner instead; its preset product links stay tied to their named examples.

Before opening the roll, decide how you will store it. The useful first purchase is the package your setup can feed and your planned projects will use.

Sources

  1. Polymaker Panchroma Basic PLA: Black / Spool / 1kg — last checked: 2026-10-01 (CA19006; selected spooled package: $18.99 USD, stock available when checked.)
  2. SUNLU PLA: Ship to USA / PLA / PLA Black — last checked: 2026-10-01 (DLZ-US-SL-PLA-BK-1KG; $10.29 USD, stock available when checked. Shipping messages conflict; no delivered quote.)
  3. MatterHackers Black MH Build PLA: quantity one — last checked: 2026-10-01 (MY6CYEZM; $19.99 USD, stock available when checked. $14.99 requires 12+ rolls.)
  4. Overture High Speed PLA: Black / 1.75mm / 1 kg — last checked: 2026-10-01 (VFPBLK17511; selected black 1.75 mm spool: $13.99 USD, stock available when checked. Recheck the exact selection.)
  5. Polymaker shipping policy — last checked: 2026-10-01
  6. SUNLU shipping information — last checked: 2026-10-01
  7. Overture US shipping policy — last checked: 2026-10-01